Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 53 / 457

Quick charging (charging method with quick charger) (if so equipped)
3-34 General information/Charging
3
For connecting and disconnecting, follow
the instruction manual for each quick
charger. 4. Make sure that the charging indicator (D)
on the instrument cluster is illuminated.
If the charging indicator is not illumi-
nated, charging has not started.
Refer to the quick charger user manual.
WARNING
 Be sure to insert the charge connector
completely into the quick charge port.
If the charge connector is only partially
inserted and the connector latch is not
locked, the operation mode of the power
switch can still be put in ON and the vehi-
cle can still be moved.
NOTE
 When the quick charge connector is con-
nected to the quick charge port, the charging
indicator will blink. Once charging has
started, the charging indicator will illuminate
and the charging port courtesy light blinks
three times.
 If you want to confirm the main drive lith-
ium-ion battery level or the predicted charg-
ing time during charging, open one of the
doors or operate the multi-information dis-
play switch, and the main drive lithium-ion
battery level display (E) appears on the
information screen in the multi-information
display.
Although the predicted charging time display
(F) appears, the charging time for quick
charging is approximately 30 minutes and
displayed “--:--” in the screen and you can-
not confirm the predicted charging time.
 You may hear operating sounds from the
main drive lithium-ion battery cooling sys-
tem, such as sounds from the cooling fan and
air conditioning compressor, during quick
charging. This is normal.
 Since the main drive lithium-ion battery
cooling system uses cool air from the air
conditioning system, the air conditioning
will automatically be operated.
After quick charging, you may find dehu-
midified water from the air conditioning sys-
tem under the vehicle. This is normal.
BK0254400US.book 34 ページ ２０１７年８月１０日 木曜日 午後１時５０分