Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 334 / 457

Cargo area cover (if so equipped)
Features and controls 5-213
5
N00528301166
1. Pull out the spring-loaded cover and insert
it in the mounting grooves (A) on both
sides.
2. Remove the cover from the mounting
grooves, and the cover will be rolled back
into the retracted position.
There are 2 installation holes (B) for the
cargo area cover.
1. Move one of the sliders (C) toward the
inside of the vehicle, and fit the protrud-
ing portion (D) into the installation hole
that is to be used. Move the opposite
slider in the same fashion.
2. After changing the position, gently shake
the entire cargo area cover to make sure it
is securely retained.
1. Roll back the cargo area cover.
2. Move one of the sliders (C) toward the
inside of the vehicle and lift it to remove
the cargo area cover.
Cargo area cover (if so
equipped)
To use
NOTE
 Do not place anything on the cargo area
cover.
To change position
NOTE
 If the rear seat touches the cargo area cover,
move the cargo area cover rearward.
The cargo area cover could be damaged if it
supports the seatback of the rear seats.
To remove
BK0254400US.book 213 ページ ２０１７年８月１０日 木曜日 午後１時５０分