Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 212 / 457

Adaptive Cruise Control System (ACC) (if so equipped)
Features and controls 5-91
5
By depressing the brake pedal while the ACC
is activated, the ACC control is canceled and
your vehicle speed will decrease.
At the point where the vehicle speed reaches
your desired speed, push down and release
the “SET -” switch; the new speed is then set
in the system.
N00582800027
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal automatically slows down the vehicle
to the set speed and ACC restarts its control.
N00581700087
There are two ways to cancel the ACC con-
trol.
 By pressing the “CANCEL” switch.
 By depressing the brake pedal.
By using the brake pedal:
NOTE
 The ACC control will not resume after
releasing the brake pedal.
To temporarily accelerate the
vehicle
WARNING
 The ACC braking control and approach
alarm functions will not work while the
accelerator pedal is depressed.
NOTE
 The set speed indication on the display turns
to “---” when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.
 In certain conditions, the braking control and
alarming functions of ACC may not work for
a short while after releasing the accelerator
pedal.
To cancel ACC control
NOTE
 You can also cancel the ACC control by
pressing the “ACC ON/OFF” switch. If this
switch is pressed while the ACC is “ON”,
the ACC will be turned off.
BK0254400US.book 91 ページ ２０１７年８月１０日 木曜日 午後１時５０分