Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 58 / 457

Charging troubleshooting guide
General information/Charging 3-39
3
Quick charge is discontin-
ued. Charging is stopped by the quick
charge timer. Charging will stop depending on the timer function setting of the quick
charge device. If you need to charge the main drive lithium-ion battery
more, start the charging procedure again.
Charging stops at 80 % capacity. Charging is designed to stop when the main drive lithium-ion battery
capacity reaches 80 %. If you need to charge the main drive lithium-ion
battery more than 80 %, start the charging procedure again.
The power supply for the quick char-
ger is off. Check whether the power supply for the quick charger is off.
Consult an administrator or a maker of the quick charger.
The charging indicator is
continuously blinking even
if the quick charge connec-
tor is not connected into the
quick charge port when you
start the Plug-in Hybrid EV
system after quick charging. Quick charging has not finished nor-
mally. Perform quick charging again and finish it normally or contact a certified
Mitsubishi EV dealer.
Plug-in Hybrid EV System
does not start after quick
charging. The vehicle have a malfunction. Contact a certified Mitsubishi EV dealer.
If you need to push the vehicle, put the operation mode of the power
switch in ON and put the select position in the “N” (NEUTRAL) position.
Symptom Possible cause Possible solution
BK0254400US.book 39 ページ ２０１７年８月１０日 木曜日 午後１時５０分