Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 374 / 457

Jump-starting the Plug-in Hybrid EV system
For emergencies 8-3
8
3. Set the parking brake firmly on your vehi-
cle and put the select position in the “P”
(PARK) position.
4. Set the parking brake firmly on the other
vehicle. Put the automatic transaxle in “P”
(PARK) or the manual transaxle in “N”
(Neutral).
5. Turn the ignition switch (the power
switch) on each vehicle to the “LOCK” or
“OFF” position.
6. Open the engine hood, remove the fuse
cover of the main fuse block.
Refer to “Engine hood” on page 9-4 and
“Fuses: Engine compartment” on page
9-23.
7. Open the cover of the jumper cable termi-
nal in the main fuse block.
8. Connect one end of one jumper cable
to the jumper cable terminal (A) of your
vehicle, and the other end to the posi-
tive (+) terminal of the booster battery
(B).
Connect one end of the other jumper cable
to the negative (-) terminal of the
booster battery, and the other end to
the designated ground location of your
vehicle.
NOTE
 Turn off all lights, heater, and other electrical
loads. This will avoid sparks and help save
both batteries.
NOTE

You cannot rescue other vehicle’s discharged
battery by connecting jumper cables using
this jumper cable terminal.
BK0254400US.book 3 ページ ２０１７年８月１０日 木曜日 午後１時５０分