Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 428 / 457

Vehicle care precautions
Vehicle care and maintenance 9-37
9
N00944001468
1. When removing the light unit (A), push it
toward the left side of the vehicle body.
2. Use a screw driver to gently pry up the tab
(B) and remove the lens.
3. Pull the bulb out of the socket.
4. To install the bulb, perform the removal
steps in reverse.
N00943901141
N00945101206
In order to maintain the value of your vehicle,
perform regular maintenance using the proper
materials and procedures. Be sure to use only
those materials and procedures that meet your
local environmental pollution control regula-
tions. Choose the materials you will use care-
fully, to be sure that they do not contain
corrosives. If you are not sure, contact a certi-
fied Mitsubishi EV dealer for help in choos-
ing these materials.
License plate lights
NOTE
 Wrap a cloth around the tip of the screw-
driver to keep from scratching the lens.
NOTE
 When mounting the light unit, insert tab (C)
first then align tab (D) with its hole.
High-mounted stop light
NOTE
 The high-mounted stop light uses an LED
instead of the bulb. Check with a certified
Mitsubishi EV dealer when the light needs to
be repaired or replaced.
Vehicle care precautions
BK0254400US.book 37 ページ ２０１７年８月１０日 木曜日 午後１時５０分