Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 399 / 457

Engine coolant/Plug-in Hybrid EV System coolant
9-8 Vehicle care and maintenance
9
The oil filter should be replaced at the time or
mileage specified in the “WARRANTY AND
MAINTENANCE MANUAL”.
Only use high quality replacement filters on
this vehicle. The manufacturer’s specifica-
tions for Mitsubishi Motors Genuine oil fil-
ters require that the filter can withstand a
pressure of 256 psi (1.8 MPa). A Mitsubishi
Motors Genuine oil filter is the best replace-
ment filter.
Follow the installation instructions printed on
the filter.
N00937801666
The engine coolant reservoir (A) and the
Plug-in Hybrid EV system coolant reservoir
(B) lets you quickly see when you need to
add coolant. When the engine and the Plug-in
Hybrid EV system are cold, the level of the
coolant in the reservoir should be between the
FULL and LOW marks. The radiator usually
stays full so there is no reason to remove the
radiator cap (C) except when you check the
coolant freeze point or replace the antifreeze
coolant.
To replace the oil filter Engine coolant/Plug-in
Hybrid EV System coolant
To check the coolant level
To add coolant
Use “Mitsubishi Motors Genuine Super Long
Life Coolant Premium” or equivalent
* .
* : similar high quality ethylene glycol based
non-silicate, non-amine, non-nitrate and
non-borate coolant with long life hybrid
organic acid technology
FULL
FULL
LOW
LOW
BK0254400US.book 8 ページ ２０１７年８月１０日 木曜日 午後１時５０分