Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 48 / 457

EV charging cable
General information/Charging 3-29
3
: Illuminates : Blinking : Not illuminated
POWER FAULT CHARGING
Operating condition
Every time the EV charging cable plug (C) is connected to an outlet, all indicator lights illumi-
nate for 1/2 second, then go out.
After initial processing is completed, when the normal charge connector is not connected to the
normal charge port, or the normal charge connector is connected to the normal charge port but
charging is not being performed.
While the main drive lithium-ion battery is being charged
When the ground cable is disconnected
Check the grounding of the outlet being used. If the outlet is properly grounded, contact a certi-
fied Mitsubishi EV dealer.
When charging is completed.
POWER FAULT
CHARGING
Abnormal operating condition and corrective action
When an electric leakage occurs or the EV charging cable malfunctions.
Stop use immediately and contact a certified Mitsubishi EV dealer.
When the EV charging cable malfunctions.
Stop use immediately and contact a certified Mitsubishi EV dealer.
If the control box indicator light does not illuminate after connecting the EV charging cable
plug to the outlet, check the circuit breaker for the outlet. If the breaker has tripped, the circuit
may not be suitable for use with EV charging cable. You should have a licensed electrician
inspect and repair the electrical circuit. If the breaker is not tripped, stop using the EV charging
cable and contact a certified Mitsubishi EV dealer.
BK0254400US.book 29 ページ ２０１７年８月１０日 木曜日 午後１時５０分