Mitsubishi MOTORS Outlander PHEV 2018, Owner'S Manual

Page: 396 / 457

Engine hood
Vehicle care and maintenance 9-5
9
Release the lever and lift the engine hood.
Support the engine hood with the hood prop.
Insert the hood prop securely in the opening
under the hood marked with an arrow.
Unlatch the prop from the engine hood and
put it back in its retainer.
Slowly lower the engine hood approximately
8 inches (20 cm), then let it drop from its own
weight.
NOTE
 To prevent damage to the engine hood and
wipers, make sure the wipers are at resting
position when you open the engine hood.
CAUTION
 Always insert the support prop into the hole
specially made for it. Propping the engine
hood at any other place could cause the prop
to slip out and lead to an accident.
 The hood prop can fall out if the hood is
lifted by a strong wind.
To close
CAUTION
 Be careful not to trap your hands or fingers
when closing the engine hood.
 Make sure the engine hood is firmly closed
before driving.
If you drive without the engine hood com-
pletely closed, it could open up while driv-
ing.
NOTE
 If this does not close the engine hood prop-
erly, drop it again from a slightly higher
position.
 Do not push down strongly on the engine
hood. Depending on how strongly or where
you push down, you could create a dent in
the vehicle body.
 If you drive with the engine hood left open, a
warning display is displayed on the informa-
tion screen in the multi-information display.
CAUTION
BK0254400US.book 5 ページ ２０１７年８月１０日 木曜日 午後１時５０分