Mitsubishi Electric FR-E710W-0.1K, Instruction Manual

Page: 139 / 349

139
Function assignment of external terminal and control
4
P
ARAM
ETE
R
S
4.11 Function assignment of external terminal and control
4.11.1 Input terminal function selection (Pr. 178 to Pr. 184)
The above parameters can be set when Pr. 160 User group read selection = "0". (Refer to page 188)
∗1
The setting value of "60" is available for Pr. 178 only.
∗2
The setting value of "61" is available for Pr. 179 only.
∗3
For the safety stop function model, this setting is active only during the communication operation. ( Refer to page 211 )
(1) Input terminal function assignment
Using Pr. 178 to Pr. 184 , set the functions of the input terminals.
Refer to the following table and set the parameters:
Purpose Parameter that should be Set Refer to Page
Assign function to input terminal
Input terminal function
selection
Pr. 178 to Pr. 184
139
Set MRS signal (output shutoff) to
NC contact specification
MRS input selection Pr. 17
141
Assign start signal and forward/
reverse command to other signals Start signal (STF/STR)
operation selection
Pr. 250
143
Assign function to output terminal
Output terminal function
assignment
Pr. 190 to Pr. 192
145
Detect output frequency
Up-to-frequency
sensitivity
Output frequency
detection
Pr. 41 to Pr. 43
149
Detect output current
Output current detection
Zero current detection
Pr. 150 to Pr. 153
150
Remote output function Remote output Pr. 495 to Pr. 497
152
Use these parameters to select/change the input terminal functions.
Parameter
Number
Name
Initial
Value
Initial Signal Setting Range
178
STF terminal function
selection
60 STF (forward rotation command)
0 to 5, 7, 8, 10, 12, 14 to 16, 18,
24, 25, 60
∗1
, 61
∗2
, 62, 65 to 67,
9999
179
STR terminal function
selection
61 STR (reverse rotation command)
180
RL terminal function
selection
0 RL (low-speed operation command)
181
RM terminal function
selection
1
RM (middle speed operation
command)
182
RH terminal function
selection
2
RH (high-speed operation
command)
183
∗3
MRS terminal function
selection
24 MRS (output stop)
184
RES terminal function
selection
62 RES (inverter reset)
Setting Signal Function Related Parameters
Refer to
Page
0 RL
Pr. 59 = 0 (initial value) Low-speed operation command
Pr. 4 to Pr. 6, Pr. 24 to Pr. 27
Pr.232 to Pr.239
102
Pr. 59 = 1, 2
∗1
Remote setting (setting clear) Pr. 59 106
Pr. 270 = 1
∗2
Stop-on contact selection 0 Pr. 270, Pr. 275, Pr. 276 133
1 RM
Pr. 59
= 0 (initial value) Middle-speed operation command
Pr. 4 to Pr. 6, Pr. 24 to Pr. 27,
Pr. 232 to Pr. 239
102
Pr. 59 = 1, 2
∗1
Remote setting (deceleration) Pr. 59 106
2 RH
Pr. 59 = 0 (initial value) High-speed operation command
Pr. 4 to Pr. 6, Pr. 24 to Pr. 27,
Pr. 232 to Pr. 239
102
Pr. 59 = 1, 2
∗1
Remote setting (acceleration) Pr. 59 106