Mitsubishi Electric FR-E710W-0.1K, Instruction Manual

Page: 302 / 349

302
Correspondences between digital and actual characters
5.4 Correspondences between digital and actual characters
There are the following correspondences between the actual alphanumeric characters and the digital characters displayed on
the operation panel:
Operation panel
indication
E.SAF
FR-PU04 Fault 14
FR-PU07
Fault
E.SAF
Name Safety circuit fault
∗
Description
Appears when safety circuit is malfunctioning.
Appears when one of the lines between S1 and PC, or between S2 and PC is opened.
Check point
If the indication appears when safety stop function is not used, check if shorting wires between S1 and PC, S2 and
PC are connected.
If the indication appears when safety stop function is used, check that the safety relay module or the connection
has no fault.
Corrective action
When not using the safety stop function, short across terminals S1 and PC and across S2 and PC with shorting
wire.
(Refer to page 31).
When using the safety stop function, check that wiring of terminal S1, S2 and PC is correct and the safety stop
input signal source such as safety relay module is operating properly. Refer to the Safety stop function instruction
manual (BCN-211508-004) for causes and countermeasures. (Please contact your sales representative for the
manual.)
∗
This function is only available for the safety stop function model.
Operation panel
indication
E.13
FR-PU04
FR-PU07
Fault 13
Name
Internal circuit fault
Description
Stop the inverter output when an internal circuit fault occurred.
Corrective action Please contact your sales representative.
NOTE
If protective functions of E.ILF, E.AIE, E.USB, E.IOH, E.PE2 and, E.SAF are activated when using the FR-PU04, "Fault
14" is displayed.
Also when the faults history is checked on the FR-PU04, the display is "E.14".
If faults other than the above appear, contact your sales representative.
Actual Digital
0
1
2
3
4
5
6
7
8
9
Actual Digital
A
B
C
E
F
G
H
I
J
L
D
Actual Digital
M
N
O
o
P
T
U
V
r
-
S