Appendix-672
Spline interpolation
To use the position adjustment function, click the menu [Tool]
→
[Position adjustment]. The Position adjust-
ment screen opens when [Position adjustment] is clicked.
Fig.7-105:Position adjustment screen
The position is adjusted with the following steps.
(A) The path point data for the Spline File Edit screen currently active is displayed in the "Adjustment tar-
get list". Select and check the path point data for which the position is to be adjusted. Multiple path
point data items can be selected.
Vector product operation
(P×P)
The adjustment data values are multiplied in respect to the path point data's robot position data.
(Position after adjustment = Path point position × adjustment data)
The adjustment follows the tool coordinate system.
The configuration flag, multi-rotation flag and additional axis data are not changed from the original
value.
Adjustment method
Explanation
Xw
Yw
PA
PB
PC
.Y
PC
.X
Xt
Yt
PA：補正対象の経路点
PB：補正結果
PC：補正データ
Xt-Yt：PAにおけるツール座標の向き
ベクトル積演算（PｘP）
PA: Path point for adjustment target
PB: Adjustment results
PC: Adjustment data
Xt-Yt: Orientation of tool coordinates at PA
Vector product calculation (P×P)
(A)
(B)
(C)
(D)
(E)
