Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, User Manual

Page: 85 / 162

7 FUNCTIONS
7.6 CC-Link IE Field Network Communication Function
83
7
Transient transmission
This function reads or writes data on the IO-Link module in line with a dedicated instruction from the master station.
The IO-Link module uses the RIRD instruction or RIWT instruction to perform transient transmission.
Data that can be read and written in transient transmission
The following table lists the IO-Link module data that can be read and written in transient transmission on the CC-Link IE Field
Network.
Specify the access code, attribute code, and address code via the control data of the RIRD instruction or RIWT instruction.
For details, refer to the following.

User's manual for the master/local module used

MELSEC iQ-R Programming Manual (Module Dedicated Instructions)
*1 The address code indicates the storage location of each data to be read or written.
Data name Access
code Attribute
code Address
code
*1
Description Readable/Writable Reference
IO-Link module
identification data 10H 05H 10H to 17H Read IO-Link module identification
data. Read Page 84 IO-Link
module
identification data
Initial operation setting 11H 05H 00H Enable/disable the initial processing
when starting the IO-Link module. Read/Write Page 84 Initial
operation setting
Output HOLD/CLEAR
setting 12H 05H 00H Configure the HOLD/CLEAR setting
of the output value for cases where a
communication error occurs. Read/Write Page 85 Output
HOLD/CLEAR
setting
Number of ON times 13H 05H 00H to 07H Read the output ON times (count) in
SIO mode. Read/Write Page 86 Number
of ON times
Process data size 20H 05H 00H Configure the swap setting and
process data size for each channel. Read/Write Page 86 Process
data size
Device validation 21H 05H 00H to 07H Validates compatibility and identity of
the IO-Link devices connected to the
IO-Link module. Read/Write Page 87 Device
validation
Data storage configuration 22H 05H 00H Configure the data storage setting for
each channel. Read/Write Page 88 Data
storage
configuration
Data storage content 24H 05H 00H to 07H Read parameters in the data storage
of each channel. Read Page 89 Data
storage content
ISDU 30H 05H 00H to 07H Read/write the IO-Link device
parameters. Read/Write Page 92 ISDU
Event data 31H 05H 00H to 07H Read event data that has occurred on
the IO-Link devices. Read Page 92 Event
data