APPX
Appendix 2 Remote Registers
141
A
• When "Without initial processing" is set
Initial processing request flag (RWr0.b8) does not turn on. The IO-Link module becomes operable (the update of external I/O
becomes enabled) without Initial processing completion flag (RWw0.b8) being turned on. When the module is powered on,
Remote READY (RWr0.b11) turns on.
Module parameter settings are read from the data storage.
*3 When data link starts at the same time of when the module is powered on
*4 When an external input device connected to X0 is on
(1) Module parameters in the data storage
(2) Read module parameters in the data storage and start the operation.
ON
(2)
ON
OFF
OFF
OFF
OFF
OFF
ON
(1)
Initial processing request flag (RWr0.b8)
Module power supply
*3
Channel 1 (CQ) external input signal 0
(RX0)
*4
Initial processing completion flag (RWw0.b8)
Remote READY (RWr0.b11)
Module setting
Controlled by the IO-Link module
Summary of Contents for CC-Link IE Field NZ2GF12A-60IOLH8
