9 PROGRAMMING
9.1 Precautions for Programming
99
9
9
PROGRAMMING
This chapter describes the programming of the IO-Link module.
9.1
Precautions for Programming
This section describes precautions to create CC-Link IE Field Network programs.
Cyclic transmission program
For a cyclic transmission program, interlock with the following link special relay (SB) and link special register (SW).
• Own station data link status (master station) (SB0049)
• Data link status (each station) (SW00B0 to SW00B7)
For details on the link special relay (SB) and link special register (SW), refer to the user's manual for the master/local module
used.
Ex.
Interlock example
Transient transmission program
For a transient transmission program, interlock with the following link special relay (SB) and link special register (SW).
• Own station baton pass status (master station) (SB0047)
• Baton pass status (each station) (SW00A0 to SW00A7)
For details on the link special relay (SB) and link special register (SW), refer to the user's manual for the master/local module
used.
Ex.
Interlock example
(1) Communication program with station No.1
(2) Communication program with station No.2
(1) Start contact
(2) Dedicated instruction to station No.1
(1)
(2)
(1)
(2)
Summary of Contents for CC-Link IE Field NZ2GF12A-60IOLH8
