Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, User Manual

Page: 114 / 162

112
9 PROGRAMMING
9.3 Example of Program to Communicate with an IO-Link Device
9.
Set "Write Value". The following are the procedure.
• Click the title cell of "Initial Value" to select all the items and copy them.
• Click the title cell of "Write Value" to select all the items and paste the copy.
• Select the items to be changed, and set new values according to Initial setting description. (
 Page 109 Initial setting
description)
10.
Click the [Execute] button to write the parameter to the IO-Link module.
11.
Close the "CC IE Field Configuration" window.
[CC IE Field Configuration]

[Close with Reflecting the Setting]
12.
Display the refresh parameter setting window and configure the setting as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Module Parameter]  [Basic Settings]

[Refresh Settings]
13.
Write the set parameter to the CPU module of the master station and reset the CPU module, or turn off and on the power
supply.
[Online]  [Write to PLC]
In this example, default settings are used for parameters other than the above. For details on parameters,
refer to the following.

Page 45 Parameter Setting

User's manual for the master/local module used