Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, User Manual

Page: 111 / 162

9 PROGRAMMING
9.3 Example of Program to Communicate with an IO-Link Device
109
9
9.3
Example of Program to Communicate with an IO-
Link Device
The following describes an example of a program that communicates with IO-Link devices by using functions of the IO-Link
module.
System configuration example
For details on system configuration, refer to the following.
 Page 101 System configuration example
Initial setting description
The following table lists the initial settings of the IO-Link module.
*1 Configure settings of channels 3 to 8 as well because any parameter write setting item must not be left blank.
Configuring the parameters
Connect an engineering tool to the CPU module and set parameters.
1.
Configure the CPU module in the following way.
[Project]  [New]
Item
*1
Description
Initial operation setting Without initial processing
Output HOLD/CLEAR setting CLEAR
Pin configuration setting Channel 1 CQ setting IO-Link mode
Channel 1 Q setting Input
Channel 2 CQ setting IO-Link mode
Channel 2 Q setting Input
IO-Link parameters
(Channel 1 setting) Process data size 16 words
Swap setting Disable
Data storage configuration Disable
Validation setting Disable
IO-Link parameters
(Channel 2 setting) Process data size 16 words
Swap setting Disable
Data storage configuration Disable
Validation setting Disable