Mitel MiVoice Office 400 System Manual Download Page 19

Page: 19 / 257

System Overview

Mitel SMB Controller

syd-0657/2.0 – R6.0 – 09.2018

Tab. 1

Mitel 6900 SIP series SIP phones

Product

Principal common features

Additional model-specific fea-
tures

• User-friendly registration, configura-

tion and operation of system features
through MiVoice Office 400 integra-
tion.

• XML browser compatible
• Automatic update of the terminal soft-

ware

• Web-user interface
• Integrated 1 Gbit Ethernet switch for

connecting a PC

• Hearing Aid Compatible (HAC) hand-

set

• Headset port convertible to

DHSG/EHS capable headset port

• Excellent voice quality due to Mitel

Hi-Q™ wideband audio technology

• Full-duplex hands-free operation

(speakerphone)

• Backlit display
• Up to 3 expansion key modules can

be connected

• Three-party conference possible

locally on the phone

• Wall mounting possible
• Power over Ethernet

Mitel 6920 SIP:
• Corded speech optimized handset
• MobileLink mobile device integra-

tion through optional USB Blue-
tooth Dongle

• Magnetic keyboard connector
• USB port 2.0 (100 mA)
• Can be used as auxiliary reception

phone (reduced functionality) in
hospitality environments

Mitel 6930 SIP:
• Corded speech optimized handset
• Support for optional cordless

speech optimized handset

• Magnetic keyboard connector
• Can be used as auxiliary reception

phone (reduced functionality) in
hospitality environments

Mitel 6930 SIP and Mitel 6940 SIP:
• Cordless speech optimized hand-

set

• Mobile phone charging point
• MobileLink mobile device integra-

tion

• Bluetooth 4.1 interface
• USB port 2.0 (500 mA)
• Can be used as operator console
• Mitel 6940 SIP
• LCD touch display
• Can be used as reception phone in

hospitality environments

General:
• Additional model-specific features

include the resolution, the display
type and size, and the number of
configurable or fixed function keys.

Mitel 6920
SIP Phone

Mitel 6930
SIP Phone

Mitel 6940
SIP Phone

Summary of Contents for MiVoice Office 400


































































































































































































































































Search results

Summary of Contents for MiVoice Office 400

Reviews:

Related manuals for MiVoice Office 400

Brands by name

Popular brands

Mitel MiVoice Office 400, System Manual

Search results

Summary of Contents for MiVoice Office 400

Reviews:

Related manuals for MiVoice Office 400

Brands by name

Popular brands