Mitel MiVoice Office 400, System Manual

Page: 60 / 257

Expansion Stages and System Capacity
60
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
There are different types of wiring adapters, of which two (WA-TS0 and WA-TS1) have
different plug-in orientations. This determines the ratio of BRI-S interfaces to BRI-T in-
terfaces.
Note
A configuration with wiring adapter is mandatory. An incorrect or missing configuration gener-
ates the corresponding error display on the LED display (F1...F4).
Tab. 24 Wiring adapter
The assignment to the RJ45 sockets depending on the wiring adapters is shown in
Tab. 33.
3. 4 System capacity
System capacities are defined on the one hand by the existing hardware with its ex-
pansion possibilities and on the other by the limits set in the software. The software lim-
its can be partly expandable by licences.
3. 4. 1 Media resources
3. 4. 2 General system capacity
The number of slots, interface cards and system modules per communication server
have already been mentioned in the previous chapters and are not listed separately in
this chapter.
Type Use with... Remarks
WA-TS0 TIC-4TS, TIC-2TS Included in the equipment supplied with the
interface cards
WA-TS1 TIC-4TS, TIC-2TS must be ordered separately
WA-2W
1)
1) Must not be used in USA/Canada.
TIC-4AB
1)
, TIC-2AB
1)
,
4)
ETAB4, EADP4 Included in the equipment supplied with the
interface cards.
WA-1PRI TIC-1PRI
1)
Included in the equipment supplied with the
interface card
WA-8DSI
2)
2) Not yet supported with Release 6.0
8DSI
2)
Included in the equipment supplied with the
interface card