Operation and Maintenance
224
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
indicated in hours, ranging between 1 and 672. The longest time period corre-
sponds to 28 days or 4 weeks.
Tab. 91
Example of event table
In this example an event message is sent to the message destinations if there is a
To-
tal synchronization loss
event message when the system generates the event mes-
sage 10 times within 1 hour.
6. 5. 1. 3
Signal destinations
After a first start, all event tables are exactly assigned to a message destination. (Ex-
ception:
Local destination
and
SNMP destination
use this event table.) You can assign
event tables to several or no message destinations
The destinations are configured in the
Message destinations
(
=h1
) view.
Signal destination system phone 1 and 2
Event messages are sent to all system phones with display and entered in the corre-
sponding message group.
• Destination system phone 1:
– By default allocated to event table 1, which is preconfigured for common use.
– Fix allocated to message group 16.
• Destination system phone 2:
– By default allocated to event table 8, which is preconfigured for front desk termi-
nals in hospitality environments.
– Fix allocated to message group 15.
External signal destinations
Depending on the event table allocated, event messages (normally Table 2) are sent to
a specified external signal destination. Two external signal destinations can be speci-
fied:
• 1 primary external signal destination
• 1 alternative external signal destination
Event type
Frequency
Time period
Total synchronization loss
10
1
