Mitel MiVoice Office 400, System Manual

Page: 58 / 257

Expansion Stages and System Capacity
58
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
Fig. 9 Design of the interface cards
3. 3. 2. 1 Trunk cards
The trunk cards contain interfaces for connection to the analogue public network
(PSTN), the digital public network (ISDN) or for networking systems to create a private
telephony network (PISN). The trunk cards can be used and operated on any slots for
interface cards.
Some trunk cards contain both network interfaces (BRI-T) and terminal interfaces
(BRI-S). On these cards the ratio of BRI-S interfaces to BRI-T interfaces is determined
by the use and plug-in orientation of the wiring adapters (see "Fitting a wiring adapter",
page 102).
Tab. 22 Trunk cards
3. 3. 2. 2 Terminal cards
Terminal cards are used for connecting digital and analogue voice and data terminals.
FXS cards are an exception. Their analogue interfaces are multifunctional. In addition
they provide interfaces for controlling external devices and switching over internal
Type
Network interfaces per
card Max. number
of cards
Remarks
TIC-1PRI 1
×
PRI-E1 4 • Contains 30 B channels
• 10 B channels can be used licence-free
•
Not usable in USA/Canada for the public network
TIC-4TS 3 × BRI-S/T + 1 × BRI-T 4 • Three BRI-T interfaces configurable to BRI-S
• One fixed BRI-T interface
TIC-2TS 2 × BRI-S/T 4 • Both BRI-T interfaces configurable to BRI-S
TIC-4AB
1)
1) Card with hardware version >= "1A" only. Card must not be used in USA/Canada.
4 × FXO 2
TIC-2AB
1)
2 × FXO 4
CAUTION !
Do not use other interface cards or interface cards with older hardware versions than listed in the table
above. The interface cards or even the communication server could be damaged.