System Overview
40
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
2. Start an IP scanner application (e.g. the FREEWARE “Advanced IP Scanner”) in or-
der to locate the SMB Controller in the IP network.
Find your SMB Controller in the list with the help of the MAC address. The MAC ad-
dress is written on a label, stuck on the CPU module (format: 08000F - XXXXXX).
Tip
– Hint: The entry of SMB Controller in the column
Manufacturer
is
MITEL CORPORATION
.
– If your SMB Controller is not listed, your computer is in another subnet. If it’s not possible
to connect the IP network in the same subnet, connect your computer either directly or
via a switch with the SMB Controller.
Set password and IP address data of the SMB Controller
1. Open a browser window and enter the found IP address of your SMB Controller in-
cluding the port 8080 (Example: http:\\10.100.98.11:8080).
→
The SMB Controller Manager entry page is opened in your web browser.
2. Log in with the default user name (
admin
) and the default password (
admin
).
→
You are asked to change the password.
→
After confirmation of the new password the system information view of the SMB
Controller Manager is opened.
3. Navigate to the
Configuration
-
IP network
view.
4. Click on
Eth0
and activate the radio button
Static
in the
IPv4 address
part.
5. Enter a static IP address, the corresponding subnet mask and the IP gateway ad-
dress. Although you could use DHCP, we recommend addressing the SMB Control-
ler with a static IP address. Click
Apply
.
6. Enter the new IP address of your SMB Controller in the browser window including
the port 8080 (Example: http:\\10.100.98.50:8080).
7. Log in with the user name
admin
and your new password.
Update the SMB Controller system software
Note
If there is already a MiVoice Office 400 application software installed, it might be necessary to
install a new version of the same, after an update of the SMB Controller system software.
1. Navigate to the view
Configuration
-
Software
-
System Software
and agree to the
EULA.
2. If your SMB Controller has internet access, click
Firmware server...
to see a list of
available system software (e.g. “Mitel-SMBC_Management-1.1.9.1_Helium.zip”).
Then click
Upload
on the line of the system software you want to upload.
If your SMB Controller has
no
internet access, click
Browse...
and select the system
software you have downloaded already. Then click
Open
.
→
The upload begins. You can view the progress with a progress indicator.
