Operation and Maintenance
193
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
6. 3. 6. 2
DECT terminals
Replacing a radio unit
1. Dismantle the defective radio unit.
2. Fit the new radio unit.
Note:
If the ports of a radio unit are to be changed or if a radio unit is no longer used, it is important to
remove the radio unit in the system configuration. If not, start-up problems may occur when
another radio unit is connected to the same ports.
Replacing a cordless phone (a phone without microSD card)
1. Cancel the registration of the old cordless phone.
2. Register the new cordless phone. The cordless phone data is preserved until the
user number is also deleted.
Cancelling the registration of a cordless phone on the system
In WebAdmin in the edit view of the cordless phone, click
Cancel registration
.
Tip:
The identification of the cordless phone is deleted only if the cordless phone is located within
the coverage range of a radio unit; otherwise, it must be deleted manually on the cordless
phone (see the cordless phone’s User’s Guide). The user number and data in the system are
retained.
Registering a cordless phone on the system
1. Prepare the cordless phone for registration (see the cordless phone’s User’s
Guide).
2. Prepare system for registration. In WebAdmin in the edit view of the cordless phone,
click
Register
.
Note:
With some phone types, the user of the cordless phone may have to identify himself to the sys-
tem using an authentication code (AC). This authentication code is issued after the
Register
button is clicked.
