Mitel MiVoice Office 400 System Manual Download Page 25 | Manualshive

Page: 25 / 257

background image

System Overview

25

Mitel SMB Controller

syd-0657/2.0 – R6.0 – 09.2018

2. 5

Various phones, terminals and equipment

Thanks to the use of international standards other clients, terminals and phones, Mitel
and third-party, can be connected and operated on the communication server:

• SIP-based phones

With the integrated SIP protocol SIP-based phones (softphones, hardphones) - or
via an SIP access point also WLAN and DECT phones - can be connected to the
communication server. Besides the basic telephony functions, features such as call
transfer, conference calls or CLIP/CLIR are also supported. Function codes can
also be used to operate various system functions.

• Cordless phones

The sturdy 9d DECT phones from the Ascom Wireless Solutions product portfolio
can be logged on to the communication server as system phones. User-friendly
messaging and alarm systems can thus be implemented in combination with the
IMS (Integrated Message Server). Other DECT phones can also be operated in
GAP mode.

• Analogue terminals

All terminals (phones, fax, modem, etc.) approved by the network operator can be
connected on the analogue terminal interfaces. The communication system sup-
ports pulse and frequency dialling modes.

• ISDN terminals

ISDN terminals that comply with the Euro ISDN standard can be connected to the
BRI-S terminal interfaces. The communication system provides a series of ISDN
features at the S bus.

• Mobile/external phones

Mobile/external phones can also be integrated into the communication system.
They can then be reached under an internal call number, and their status is moni-
tored and displayed. Internal/external calls can be made via the integrated mo-
bile/external phone; system functions can also be executed using function codes.
With the Mitel Mobile Client for mobile phones application all the main telephony
functions are available with menu prompting (see "Mitel Applications", page 26).

2. 6

Solutions

• Alarming and Health care

Thanks to the components Mitel Alarm Server, I/O-Gateway and the OpenCount
application, flexible solutions are available for hospitals and old people's nursing
homes. MiVoice Office 400 communication-server-integrated functions such as "Di-
rect response" "Hotline alarm" or "PIN telephony" allow easy deployment of availa-
ble features.

«
...
23
24
25
26
27
...
»

Summary of Contents for MiVoice Office 400


































































































































































































































































Reviews:

No comments

Related manuals for MiVoice Office 400

Brand: Panasonic Pages: 104

Brand: Panasonic Pages: 32

Brand: Neo Car Audio Pages: 19

Brand: K-array Pages: 20

Brand: Panamax Pages: 16

Brand: Hama Pages: 75

Brand: Audiovox Pages: 2

Brand: VIS-A-VIS Pages: 4

Brand: Clatronic Pages: 78

Brand: Grundig Pages: 85

Brand: Balboa Instruments Pages: 76

Brand: RCA Pages: 2

Brand: RF SOLUTIONS Pages: 8

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 29

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 44

Brand: Panasonic Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands