Operation and Maintenance
219
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
Terminal power
supply: Overload
(Mitel 470
only)
Rated output slightly exceeded for > 4 s.
Date, time
critical
(negative,
with
match)
Terminal power supply: Shut-
down (Mitel 470 only)
Rated output clearly exceeded for 4 s
Date, time
critical
(negative,
with
match)
Terminal power
supply: Switching back on
(Mitel 470 only)
The power supply to the terminals was switched
back on after deactivation due to overflow.
Date, time
critical
(positive,
with
match)
Terminal power
supply: Within normal range
again
(Mitel 470 only)
The power supply to the terminals is back in the
normal rated output range following a slight,
preceding overflow.
Date, time
critical
(positive,
with
match)
Test event message
The configuration of message destinations can
be tested with this event message.
Date, time
Serious
(without
match)
The communication server
has been restarted
The communication server was restarted manu-
ally or automatically due to an error.
Date, time
Critical
(without
match)
The licence limit for BluStar
clients has been reached.
A BluStar client was unable to register because
there are too few licences for this client type.
Parameter 1: 0 (not used)
Licence type: 0 and 1: (not used), 2: BluStar CTI,
3: BluStar Softphone, 4: BluStar video option,
5: BluStar Presence option
Parameter 1, licence
type, total purchased
licences, date, time
Serious
(negative,
with
match)
The licence limit for CSTA
sessions has been reached
An application is unable to set up a CSTA ses-
sion to monitor/check a terminal because there
are too few
CSTA Sessions
licences available.
Max. number of
licences, date, time
Serious
(negative,
with
match)
The licence limit for Dual
Homing has been reached
A SIP phone in the Mitel 6800/6900 SIP series
has attempted to register on a backup communi-
cation server and not enough licences are avail-
able.
Note:
This event message is generated by the backup
communication server.
Date, time
Serious
(negative,
with
match)
The licence limit for Mitel
Dialer has been reached
Mitel Dialer could not be linked to a user
because too few licences are available.
Total purchased
licences, date, time
Serious
(negative,
with
match)
Event message
Trigger condition
Details
1)
Severity
