Operation and Maintenance
221
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
TLS certificate was
generated: Upgrade non-
Mitel endpoints now
A TLS certificate has been generated. If genera-
tion is manual, the certificate must be imported
manually into the Mitel SIP nodes. The certifi-
cate must always be imported manually on all
non-Mitel nodes and non-Mitel endpoints.
Date, time
Normal
(without
match)
TLS server certificate: Valida-
tion failed
While a TLS connection is established the vali-
dation of the certificate of the TLS server failed.
Service, TCP port,
reason, date, time
critical
(negative,
with
match)
TLS server certificate: Valida-
tion successful
The validation of the certificate of the TLS server
was successful.
Service, TCP port,
date, time
critical
(positive,
with
match)
Too few FoIP channels
Setting up a fax connection via T.38 failed
because no FoIP channel is available.
Available FoIP chan-
nels on node
Serious
(without
match)
Too few licences for IP sys-
tem phones
A MiVoice 5361 IP / 5370 IP / 5380 IP was una-
ble to register because there are too few IP sys-
tem phone licences.
Date, time
Serious
(negative,
with
match)
Too few licences for PMS
interface
Either the
Hospitality PMS Interface
licence is
missing or the number of
Hospitality PMS
Rooms
licences available is insufficient.
Number of licensed
rooms, number of
configured rooms,
date, time
Serious
(negative,
with
match)
Too few VoIP channel
licences
Connection setup failed because the licence
limit for simultaneously active VoIP channels
has been reached.
No. of licensed VoIP
channels, Date, Time
Serious
(without
match)
Too few VoIP channels
An user is trying to set up a connection that
requires one or more VoIP channels which are
currently not available.
Available VoIP chan-
nels on this node,
date, time
Normal
(without
match)
Too many errors with the
same ID
An unusual amount of errors (more than 50 per
hour) with the same error ID have occurred.
Error ID, date, time
Normal
(without
match)
Too many event messages
Number of message types exceeds limit entered
in the table on:
• "Synch. "Synch.loss on BRI/PRI"
• "Outgoing Call Rejected"
• "No response from network"
Date, time
Normal
(without
match)
Too much user data
System capacity exceeded
Date, time
Critical
(without
match)
Total synchronization loss
Network synchronisation has failed on all
BRI/PRI interfaces
Date, time
Serious
(negative,
with
match)
Event message
Trigger condition
Details
1)
Severity
