System Overview
45
Mitel SMB Controller
syd-0657/2.0 – R6.0 – 09.2018
4. Set the static IP address of the communication server (
Administration
/
PBX settings
/
PBX address
). To change the settings you have to enter the administrator pass-
word first (default =
0000
).
5. Restart the phone and enter the call number of the user you want to allocate to this
phone as
Registration code
.
→
The phone registers on the communication server. If a new phone software is
available, it is automatically updated and the phone restarts again.
Connect the digital system phones MiVoice 5300
1. Add one ore more expansion key module(s) to the phones.
2. Connect the phones to the DSI interfaces on the front panel. Connect the phones in
the same order as you have set them up in the previous chapter and start with the
lowest port number.
3. The phones are registered and allocated to their phone data instance in the commu-
nication server. If you keep the suggested order, the phone type matches with the
configured terminal type. You can fix a terminal mismatch in the WebAdmin
terminal
view.
Test your configuration
Now you are able to make internal calls between the phones you connected to your
communication server. Do some calling tests between the different phone types and
check the audio. In the documentation set you will find the user’s guides to your
phones.
2. 9. 7
Make further configurations
Congratulations, you have set up the communication server for self training purposes.
Now you have a perfect configuration platform to learn more about the communication
server, its features and expansion possibilities.
For further configurations, use the
WebAdmin configuration assistant
and the online
help. For detailed information, see the user’s guides and system manuals (part of the
Documentation set
).
