manualshive.com logo in svg

Mitel MiVoice Office 400, System Manual

The Mitel MiVoice Office 400 is a cutting-edge communication solution designed for businesses. To effortlessly install and configure this remarkable system, refer to our comprehensive Installation Manual available for free download at manualshive.com. Ensure a seamless setup by referring to the manual from manualshive.com.

Share
Download
background image

Operation and Maintenance

180

Mitel SMB Controller

syd-0657/2.0 – R6.0 – 09.2018

6. 1. 1. 1

System software

When we talk about the system software we have to distinguish between the SMB 
Controller system software (based on Linux) and the MiVoice Office 400 application 
software, running in this Linux environment. Both software packages are stored in 
compressed form in the Flash memory.
The RAM components comprise the main memory for program data. When the com-
munication server starts up, the software on the Flash memory is decompressed, 
loaded into the main memory and started.

6. 1. 1. 2

File system

When we talk about the file system, we have to distinguish between the SMB Control-
ler file system (based on Linux) and the MiVoice Office 400 file system:

SMB Controller file system

The SMB Controller file system comprises the system software, the emergency system 
software and the boot software. The SMB Controller Manager (including the help files) 
is part of the system software and in reduced form part of the emergency system soft-
ware. 
Usually there is no need to access the SMB Controller file system, as all needed func-
tions are available in the SMB Controller Manager. For special cases you can access 
the SMB Controller file system with a SSH session.

MiVoice Office 400 file system

The file system of the MiVoice Office 400 communication server comprises the MiVoice 
Office 400 application software, the software for system phones, the system and termi-
nal configuration data, the audio data, system logs, data for WebAdmin, etc. With 
WebAdmin you have access to the file system via the menu item 

File management

. 

You can see the file system memory load and you can load audio data, languages for 
the user interface and online help, language files for Mitel 6800/6900 SIP-series 
phones as well as an external numbering plan for SIP connection. Moreover, with the 
file browser you have the possibility to view, upload, replace or delete folders and files 
in the file system. (see also "File management", page 172). 
Functions for backing up and restoring MiVoice Office 400 configuration data and au-
dio data are available in the WebAdmin

Maintenance

 / 

Data backup

 (

=um

) view (see 

also "Data backup", page 175).
Usually there is no need to access the MiVoice Office 400 file system directly as all 
needed functions are available in WebAdmin. For special cases you can access the 
MiVoice Office 400 file system with a SSH session via the folder 

/home/mivo400

.

Summary of Contents for MiVoice Office 400


































































































































































































































































Reviews:

No comments

Related manuals for MiVoice Office 400

Magnavox MME239 - Micro DVD Home Theater System User Manual preview
MME239 - Micro DVD Home Theater System
Brand: Magnavox Pages: 39
Blaupunkt CARACAS RCR 27 Operating Instructions Manual preview
CARACAS RCR 27
Brand: Blaupunkt Pages: 15
Biamp TesiraFORTÉ AVB VT4 System Design Manual preview
TesiraFORTÉ AVB VT4
Brand: Biamp Pages: 2
Dickey-John Control Point Operator'S Manual preview
Control Point
Brand: Dickey-John Pages: 109
CLIMAVENETA CVM 2 Technical Manual preview
CVM 2
Brand: CLIMAVENETA Pages: 23
Audiovox CDC-FDF Installation Manual preview
CDC-FDF
Brand: Audiovox Pages: 2
Becker DTM High Speed 7910 Operating Manual preview
DTM High Speed 7910
Brand: Becker Pages: 4
Memsic DMU380SA Series User Manual preview
DMU380SA Series
Brand: Memsic Pages: 105
Vantage Hearth Q-ETS3 Installation preview
Q-ETS3
Brand: Vantage Hearth Pages: 2
Nibe MODBUS 40 Installer Manual preview
MODBUS 40
Brand: Nibe Pages: 32
Pioneer DEH-23UB Owner'S Manual preview
DEH-23UB
Brand: Pioneer Pages: 36
Pioneer AVH-P4150DVD Installation Manual preview
AVH-P4150DVD
Brand: Pioneer Pages: 44
Pioneer DEH-2350UB Owner'S Manual preview
DEH-2350UB
Brand: Pioneer Pages: 64
Pioneer MXT-X186UI Owner'S Manual preview
MXT-X186UI
Brand: Pioneer Pages: 28
Pioneer Premier DEH-P560MP Operation Manual preview
Premier DEH-P560MP
Brand: Pioneer Pages: 162
Sailor C4951WP Operating And Installation Instructions preview
C4951WP
Brand: Sailor Pages: 38
Jensen CM9521 Owner'S Manual preview
CM9521
Brand: Jensen Pages: 17
Siemens SINUMERIK 802D Short Manual preview
SINUMERIK 802D
Brand: Siemens Pages: 49

Brands by name

Popular brands

Load more brands