Mita PointSource Ai 3010, Service Manual

Page: 124 / 478

3-1-31
2AR
• Adjustment on a machine without an adjustable hinge (Figure 3-1-39):
1. Disconnect the SRDF connector and remove the SRDF from the machine.
2. Loosen the four screws securing the right leg of the SRDF.
3. Adjust the position of the SRDF by moving the right leg back and forth.
4. Retighten the four screws loosened in step 2.
5. Refit all removed parts.
• Adjustment on a machine equipped with an adjustable hinge (Figure 3-1-40):
1. Open the SRDF.
2. Loosen the screw securing the right leg of the SRDF on the right.
3. Adjust the position of the SRDF by rotating the adjustment screw behind the right
leg of the SRDF.
4. Retighten the screw loosened in step 2.
5. Refit all removed parts.
Figure 3-1-39
Screws
SRDF right leg
Screw
Adjustment
screw
Adjustable hinge
SRDF right leg
Figure 3-1-40