Mita PointSource Ai 3010, Service Manual

Page: 220 / 478

3-2-80-3
2AR-1
Mainte-
nance Description
item No.
Setting the self telephone number
1. Enter the telephone number using the numeric keys.
Up to 20 digits can be entered.
To correct the entered telephone number or to delete the stored
telephone number, reset by pressing the stop/clear key.
2. Press the start key.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the type of telephone line
1. Change the setting using the numeric keys.
DTMF
10 PPS
20 PPS
Display
1: DTMF
2: 10
3: 20
Description
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the number of rings in fax/telephone auto select mode
According to the user request, used to increase or decrease the time
required to switch to a fax.
1. Change the setting using the numeric keys.
0 to 15
Description
Number of fax/telephone rings
Setting range
When set to 0, a fax is selected immediately after receiving a ring
tone.
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting remote diagnostic transmission
1. Enter 1 or 2 using the numeric keys to select if remote diagnostic
transmission is to be enabled.
Remote diagnostic transmission is enabled.
Remote diagnostic transmission is disabled.
Display
1: ON
2: OFF
Description
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for
selecting a maintenance item No. is displayed.
U603
(cont.)