Mita PointSource Ai 3010, Service Manual

Page: 228 / 478

3-2-80-11
2AR-1
Mainte-
nance Description
item No.
Setting the voice response
1. Enter 1 or 2 using the numeric keys to change the setting.
Voice response is performed.
Voice response is not performed.
Display
1: ON
2: OFF
Description
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the communication starting speed
Sets the initial communication speed when starting transmission. When
the destination unit has V.34 capability, V.34 is selected for transmission,
regardless of this setting.
1. Change the setting using the numeric keys.
V.17, 14400 bps
V.17, 9600 bps
V.27ter, 4800 bps
V.27ter, 2400 bps
Display
1: 144
2: 96
3: 48
4: 24
Description
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the reception speed
Sets the reception speed that the sender is informed of using the DIS or
NSF signal. When the destination unit has V.34 capability, V.34 is
selected, regardless of the setting.
1. Change the setting using the numeric keys.
V.17, V.33, V.29, V.27ter
V.29, V.27ter
V.27ter
V.27ter (fallback only)
Display
1: 144
2: 96
3: 48
4: 24
Description
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
U607
(cont.)