Mita PointSource Ai 3010, Service Manual

Page: 388 / 478

Problem Causes/check procedures Corrective measures
2AR
3-6-17
(6)
A paper jam
in the paper
feed section
is indicated
during copy-
ing (multiple
sheets in
copier vertical
conveying
section).
(7)
A paper jam
in the paper
conveying
section is indi-
cated during
copying (jam
in registration/
transfer sec-
tion).
(8)
A paper jam
in the fixing
section is indi-
cated during
copying (jam
in fixing sec-
tion).
Check if the feed guides are
deformed.
Check if the registration clutch
malfunctions.
Electrical problem with the
registration clutch.
Check if the left and right regis-
tration rollers contact each
other.
Check if the left and right feed
rollers contact each other.
Check if the registration clutch
malfunctions.
Electrical problem with the
registration clutch.
Check if the left and right regis-
tration rollers contact each
other.
Check if the left and right feed
rollers contact each other.
Check if the fixing unit front
right and front left guides are
deformed.
Check if the press roller is
extremely dirty or deformed.
Check if the heat roller separa-
tion claws are dirty or deformed.
Check if the heat roller and its
separation claws contact each
other.
Check visually and remedy if
necessary.
Check visually and remedy if
necessary.
Check (see page 3-6-49).
Check visually and remedy if
necessary.
Check visually and remedy if
necessary.
Check and remedy if necessary.
Check (see page 3-6-49).
Check visually and remedy if
necessary.
Check visually and remedy if
necessary.
Remedy or replace if necessary.
Clean or replace if necessary.
Clean or replace if necessary.
Remedy if the separation claw
springs are out of place.