Mita PointSource Ai 3010, Service Manual

Page: 406 / 478

Terminals (CN) Voltage Remarks
3-6-33
2AR
1-1, 5 1-3 5 V DC 5 V DC supply from PSPCB, input
1-2 1-3 3.4 V DC 3.4 V DC supply from PSPCB, input
1-6 1-4 +12 V DC +12 V DC supply from PSPCB, input
2-1 2-14 0/5 V DC ODSW on/off, input
2-2 2-14 SM current control voltage SM Vref, output
2-3 2-14 0/5 V DC SM drive control signal SM M1, output
2-4 2-14 0/5 V DC SM drive control signal SM M2, output
2-5 2-14 0/5 V DC SM drive control signal SM M3, output
2-6 2-14 0/5 V DC SM drive control signal SM M4, output
2-7 2-14 0/5 V DC SM drive control signal SM M5, output
2-8 2-14 0/5 V DC (pulse) SM drive clock pulse, output
2-9 2-14 0/5 V DC SM rotation direction switching signal SM
CWB, output
2-10 2-14 0/5 V DC SM control signal SM RET, output
2-11 2-14 0/5 V DC SM enable signal, output
2-12 2-14 5/0 V DC EL on/off, output
2-13 2-14 5/0 V DC SHPSW on/off, input
3-1 3-2 0/5 V DC (pulse) CCD drive clock signal, output
3-3 3-2 0/5 V DC CCDPCB RS signal, output
3-5 3-4 0/5 V DC CCDPCB CLP signal, output
3-7 3-6 0/5 V DC CCDPCB SHIFT signal, output
3-9 3-10 5 V DC 5 V DC supply for CCDPCB, output
4-1 4-2 CCD control signal VO_O, input
4-3 4-4 CCD control signal VO_E, input
4-5 4-6 +12 V DC +12 V DC supply for CCDPCB, output
5-2 4-6 0/5 V DC OSBSW* on/off, input
5-3 4-6 0/5 V DC OFSW* on/off, input
5-4 4-6 0/5 V DC OSSW* on/off, input
5-7 4-6 0/5 V DC SRDF* installed/not installed signal, input
5-8 4-6 0/5 V DC OSWSW* on/off, input
5-9 4-6 5/0 V DC DFSSW2* off/on, input
5-10 4-6 5/0 V DC DFSSW1* off/on, input
5-11 4-6 5/0 V DC OSLSW* off/on, input
5-12 4-6 5/0 V DC DFTSW* off/on, input
6-1 4-6 0/5 V DC OFM* control signal OFM RET, output
6-2 4-6 0/5 V DC (pulse) OFM* drive clock pulse, output
6-3 4-6 0/5 V DC OFM* rotation direction switching signal
OFM CWB, output
6-4 4-6 0/5 V DC OCM* enable signal, output
6-5 4-6 0/5 V DC OCM* control signal OCM RET, output
* Optional.