Mita PointSource Ai 3010, Service Manual

Page: 234 / 478

3-2-80-17
2AR-1
Mainte-
nance Description
item No.
U609 Setting communication time
Description
Sets the time-out time for fax transmission.
Purpose
Used mainly to improve transmission performance for international
communication.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select an item using the cursor up/down keys.
3. Press the start key. The screen for the selected item is displayed.
Sets the T0 time-out time.
Sets the T1 time-out time.
Sets the T2 time-out time.
Sets the Ta time-out time.
Sets the Tb time-out time.
Sets the Tc time-out time.
Sets the Td time-out time.
Display
T0
T1
T2
Ta
Tb
Tc
Td
Description
Setting the T0 time-out time
Sets the time before detecting a DIS signal after a dialing signal is sent.
Depending on the quality of the exchange, or when the auto select
function is selected at the destination unit, a line can be disconnected.
Change the setting to prevent this problem.
1. Change the setting using the numeric keys.
30 to 90 s
Description
T0 time-out time
Setting range
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the T1 time-out time
Sets the time before receiving the correct signal after detecting a CED
signal. No change is necessary for this maintenance item.
1. Change the setting using the numeric keys.
30 to 90 s
Description
T1 time-out time
Setting range
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.