Mita PointSource Ai 3010, Service Manual

Page: 245 / 478

3-2-80-28
2AR-1
Mainte-
nance Description
item No.
U650 Setting the fax paper size
Description
Makes settings for fax reception regarding the sizes of the fax paper and
received images.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select an item using the cursor up/down keys.
3. Press the start key. The screen for the selected item is displayed.
Sets the number of lines to be ignored when
receiving a fax at 100% magnification.
Sets the number of lines to be ignored when
receiving a fax in auto reduction mode.
Sets the number of lines to be ignored when
receiving a fax (A4R, letter) in auto reduction
mode.
Sets the recording width for inch
specifications.
Display
CUT LINE (100%)
CUT LINE (AUTO)
CUT LINE (A4)
RX WIDTH 11"
Description
Setting the number of lines to be ignored when receiving a fax at
100% magnification
Sets the maximum number of lines to be ignored if the received data
volume exceeds the recording capacity when recording the data at 100%
magnification. If the number of exceeded lines is below the setting, those
lines are ignored. If over the setting, they are recorded on the next page.
1. Change the setting using the numeric keys.
Description
Number of lines
to be ignored
when receiving
at 100%
Setting range Initial setting Change in value per step
0 to 22 3 6 lines
Increase the setting if a blank second page is received, and decrease
it if the received image does not include the entire transmitted data.
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.