Mita PointSource Ai 3010, Service Manual

Page: 292 / 478

23
3-3-19
(9-2) Adjusting the leading edge registration for memory image printing
Make the following adjustment if there is a regular error between the leading edge of the
copy image and the trailing edge of the original during memory copying.
U053
(P.3-2-20)
U403
(P.3-3-42)
U066
(P.3-3-40)
U065
(P.3-3-38)
U407
(P.3-3-19)
U407
U034
(P.3-3-18)
U402
(P.3-3-21)
Caution: Before performing the following adjustment, ensure that the above
adjustments have been made in maintenance mode.
<Procedure>
Yes
No
Start
Enter maintenance mode.
Enter “407” using the numeric keys.
Press the start key.
Press the interrupt key.
Press the start key
and make a test copy.
Is the leading edge
registration correct?
Press the start key.
The new setting is stored.
For copy example 1, decrease
the value using the cursor left key.
For copy example 2, increase
the value using the cursor right key.
Setting range: –10.0 - +10.0
Changing the value by 1 moves
the leading edge by 1 mm.
Initilal setting: 0
Press the stop/clear key.
Exit maintenance mode.
End
Original Copy
example 1
Figure 3-3-22
Copy
example 2
2AR-3