Mita PointSource Ai 3010, Service Manual

Page: 243 / 478

3-2-80-26
2AR-1
Mainte-
nance Description
item No.
U616 Adjusting the ratio of make-to-break of dial pulses
Description
Adjusts the ratio of make-to-break (ratio of make in pulse cycles) of dial
pulses.
Purpose
Change the setting if dial pulse transmission problems occur. Note that 20
PPS is for Japanese specifications only and no setting is necessary for
other specifications.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select an item using the cursor up/down keys.
3. Press the start key. The screen for the selected item is displayed.
Make time (10 PPS)
Make time (20 PPS)
Display
MAKE TIME (10 PPS)
MAKE TIME (20 PPS)
Description
Setting
1. Change the setting using the numeric keys.
1 to 99 (ms)
1 to 49 (ms)
Description
Make time in the pulse cycle (10 PPS)
Make time in the pulse cycle (20 PPS)
Setting range
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen
for selecting a maintenance item No. is displayed.