Mita PointSource Ai 3010, Service Manual

Page: 219 / 478

3-2-80-2
2AR-1
Mainte-
nance Description
item No.
U602 Setting factory defaults
Description
Initializes software switches other than that for machine data and SRAM
on the optional fax board according to the destination and OEM.
Purpose
Used to initialize the fax board to the factory default.
Method
1. Press the start key. Data initialization starts. To cancel data initializa-
tion, press the stop/clear key.
2. After data initialization, the entered destination and OEM codes are
displayed, and the ROM version is displayed after two seconds.
INI. SHIP DATA
COMPLETED 000 000
INI. SHIP DATA
COMPLETED V1.00
U603 Setting the user registration data
Description
Makes user settings to enable the use of the copier as a fax.
Purpose
To be run after installation of the optional fax board.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select an item using the cursor up/down keys.
3. Press the start key. The screen for the selected item is displayed.
Sets the self telephone number.
Sets the type of telephone line.
Sets the number of rings in fax/telephone
auto select mode.
Sets remote diagnostic transmission.
Display
SELF TEL No.
LINE TYPE
RINGS (F/T) #
REMOTE DIAG
Description