Mita PointSource Ai 3010, Service Manual

Page: 296 / 478

2AR
3-3-23
• Adjusting the amount of slack in the paper at the registration roller
End
Start
Enter maintenance mode.
Enter “051” using the numeric keys.
Yes
Yes
No
No
Press the start key.
Press the interrupt key.
Press the start key
to make a test copy.
Is the
leading edge of the image
missing or varying randomly
(copy example 1)?
Is the
copy paper Z-folded
(copy example 2)?
Press the stop/clear key.
Exit maintenance mode.
Decrease the value using the cursor right key.
Increase the value using the cursor left key.
Press the start key.
Setting range: –30 - +20
Changing the value
by 1 changes the amount of slack by 1 mm
Initial setting: 0
The greater the value,
the larger the amount of slack;
The smaller the value,
the smaller the amount of slack.
(See Figure 3-3-25)
The new setting is stored.
Select “DECK DATA”.
RESIST DATA: Amount of slack in the paper
at the registration roller
Select “RESIST DATA”.