Mita PointSource Ai 3010, Service Manual

Page: 261 / 478

3-2-84
2AR-1
Mainte-
nance Description
item No.
U990 Checking/clearing the time for the exposure lamp to light
Description
Displays, clears or changes the accumulated time for the exposure lamp
to light.
Purpose
To check duration of use of the exposure lamp. Also to clear the accumu-
lated time for the lamp after replacement.
Method
Press the start key. The accumulated time of illumination for the exposure
lamp is displayed in minutes.
Clearing
1. Select CLEAR using the cursor up/down keys.
2. Press the start key. The accumulated time is cleared, and the screen
for selecting a maintenance item No. is displayed.
Setting
1. Enter a six-digit accumulated time using the numeric keys.
2. Press the start key. The time is set, and the screen for selecting a
maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the accumulated time,
press the stop/clear key. The screen for selecting a maintenance item No.
is displayed.
U992 Checking or clearing the printer/fax count
Description
Displays, clears or changes the print count of the printer or fax when the
optional printer board or fax board is installed.
Purpose
To check the condition of use of the printer or fax.
Method
Press the start key. The print count of the printer or fax is displayed.
Setting
1. Select the count to be changed using the cursor up/down keys.
2. Enter a six-digit numerical value using the numeric keys. To clear both
of the printer and fax counts, press the reset key.
3. Press the start key. The count is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No.
is displayed.