Mita PointSource Ai 3010, Service Manual

Page: 128 / 478

3-2-3
2AR
• Operation execution
The specified operations and auto adjustments are performed by pressing the start key. In
a maintenance item where multiple operations can be performed, the item to be executed
is selected by pressing the cursor up/down keys.
1
Drive motors and fans ON U030
MAIN
EJECT (REV, L)
EJECT (REV, L)
EJECT (FWD, L) EJECT (REV, H)
EJECT (FWD, H)
2
3
Metric
2
Start
Stop/
Clear
3
Inch
/ C
Figure 3-2-2
1
Items ··································· Displays the selected item in reverse.
2
Stop/clear key ····················· Stops operation.
3
Start key ······························ Starts operation.
• Interrupt copy mode
Outputting a test copy or PG pattern is required in some maintenance items. Such an
output is enabled by pressing the interrupt key to enter interrupt copy mode.
However, since this function is restricted depending on maintenance items, only
outputting may be enabled, or a test copy even from an original may not be as good as
that made in normal copy mode.
To return the screen from interrupt copy mode to maintenance mode, press the interrupt
key again.