Operating
the SmartRack 116 IP Switching System Locally
Troubleshooting – Update Software
84
| SmartRack 116 IP
5. Click
Start
.
The SmartRack 116 IP Switch Update flashes the firmware. On completion
firmware version number appears.
If the status of the device is busy
cannot be upgraded. To free the device
device resets and the status is now free. Click
6. Check that the updated version number is correct by pressing
Manually Updating the RICC/ROCs
You can manually update the RICC/ROCs after starting the Update software.
To manually update the RICC/ROCs
1. Select one or more ROCs..
2. Press
Options -> Advanced
3. Open the appropriate hex fi
4. Click
Start
.
The firmware updates.
6.3.9
Restoring Factory Settings
You can restore the OSD to the factory settings from the Update software.
All changes made (such as
removed.
To restore the OSD factory settings:
1. Select
Options/Advanced/Set default
The OSD returns to the factory default settings.
You can also restore the OSD
6.4 Troubleshooting
This section describes how to troubleshoot the following problems that may arise
when updating the SmartRack 116 IP
Unit hangs or mouse malfunctions
Break in communication
witching System Locally
Switch Update flashes the firmware. On completion
firmware version number appears.
If the status of the device is busy - see the bottom of Figure 83- the system
cannot be upgraded. To free the device, choose
Options/Advanced/Reset
and the status is now free. Click
Start
.
Check that the updated version number is correct by pressing
RICC/ROCs
You can manually update the RICC/ROCs after starting the Update software.
RICC/ROCs:
Select one or more ROCs..
> Advanced -> Manual Update
.
Open the appropriate hex file.
Restoring Factory Settings
You can restore the OSD to the factory settings from the Update software.
such as passwords, access rights, and names) will be
To restore the OSD factory settings:
Options/Advanced/Set default
.
The OSD returns to the factory default settings.
You can also restore the OSD default settings from the OSD (F7) (see
Troubleshooting – Update Software
describes how to troubleshoot the following problems that may arise
SmartRack 116 IP firmware:
Unit hangs or mouse malfunctions
Switch Update flashes the firmware. On completion, the
the system
Options/Advanced/Reset
. The
.
You can manually update the RICC/ROCs after starting the Update software.
You can restore the OSD to the factory settings from the Update software.
names) will be
see page 71)
describes how to troubleshoot the following problems that may arise
Summary of Contents for SMARTRACK 116 IP
Page 92: ...201204210 933213_EN...
