Operating
the SmartRack 116 IP Switching System Locally
Upgrading the SmartRack 116 IP Firmware
78
| SmartRack 116 IP
To update the DDC information, follow the steps in the procedure for inputting DCC
information.
6.3 Upgrading the SmartRack 116 IP Firmware
With the SmartRack 116 IP Switch Update software, you can upgrade the firmware
for the:
Switch processors
RICC/ROCs
The Update software enables you to add new features and fix bugs in a quick and
efficient manner. You can also return the OSD to the factory default settings via the
Update software. You can install the Update software on any computer, even one that
is not part of the SmartRack 116 IP system.
6.3.1
Downloading Update Software and Latest Firmware
The Update software and latest firmware for your system are located on our website
at:
http://www.minicom.com/phandlc.htm
You can download any of the following firmware packages:
Complete Firmware Package – This includes the firmware for all Smart switches
and RICCS and ROCS.
Firmware Package for Smart Switch models – This includes the firmware for all
Smart switches.
Smart CAT5 Switch Firmware – There are multiple hardware versions of Smart
CAT5 Switch units, each with version specific firmware. On the Web page, find the
description and table that identifies your version.
Firmware Package for RICC and ROC models – Download a firmware package for
RICC and ROC models (see the table on the Web page for the supported
RICC/ROC models). Or, search for and download the specific RICC/ROC models
with the correct firmware version.
6.3.2
Update Software System Requirements
The following are the Update software system requirements:
Pentium II class computer with 256 MB RAM and 10 MB free hard drive space
Free Serial port
Windows 2000 or later
Summary of Contents for SMARTRACK 116 IP
Page 92: ...201204210 933213_EN...
