Installation
Overview
User Guide
|
15
2 Installation
2.1 Overview
Install the SmartRack 116 IP system as follows:
1. Remove the SmartRack 116 IP system from the package, and check that all
components are present and in good working condition.
2. Mount the SmartRack 116 IP unit in a rack.
3. Make all hardware connections between the power source, SmartRack 116 IP,
services, network, and KVM console.
4. Power on the SmartRack 116 IP unit.
2.2 System Components
Before installing the SmartRack 116 IP system, verify that you have all the
components on the following list, as well as any other items required for installation.
The SmartRack 116 IP system consists of:
One SmartRack (p/n 0SU52088)
SmartRack Switch (p/n 0SU70006)
One RS232 Download cable (p/n 5CB40419)
ROCS – PS/2, USB (ordered separately)
CAT5 cables (1.5 m provided)
Hardware kit
2.2.1
Hardware Kit
The hardware kit contains the following items:
Rail with front and rear bracket x 2, for rack depth of 614 ~ 800 mm. Right and
left sides are different.
Figure 1 – Rails
Long bracket x 2. (For increased rack depth of 905 ~ 990mm)
Summary of Contents for SMARTRACK 116 IP
Page 92: ...201204210 933213_EN...
