Figure
Configuring Security Settings
The OSD comes with an advanced password security system that contains three
different security levels. Each security level has different
as follows:
Administrator (Status A)
Set and modify all passwords and security profiles
Fully access any computer
Use all OSD functions
Supervisor (Status S)
who can:
Fully access any computer
Access the following OSD
the Confirmation label.
User (Status U)
– There are
Each User has a Profile set by the Administrator that defines the access level to
different computers. There are
6.2.7 on page 73.
Activating Password Protection
By default, OSD access is not password protected. Only the Administrator can
password-protect the OSD or disable password protection.
To activate password protection:
1. In the General settings window
2. Press the Space bar to toggle between Security On
The password dialog box appears.
3. Type the Administrator’s password (default is “admin”).
Operating
the SmartRack 116 IP Switching System Locally
Figure 76 – General Settings Window
Configuring Security Settings
The OSD comes with an advanced password security system that contains three
different security levels. Each security level has different access rights to the system,
Administrator (Status A)
who can:
Set and modify all passwords and security profiles
Fully access any computer
Use all OSD functions
who can:
Fully access any computer
Access the following OSD functions only – F4 Scan, F5 Tune, and F6 Moving
the Confirmation label.
There are six different Users in the SmartRack 116 IP
Each User has a Profile set by the Administrator that defines the access level to
There are three different access levels – explained
Activating Password Protection
OSD access is not password protected. Only the Administrator can
protect the OSD or disable password protection.
To activate password protection:
the General settings window (see Figure 76), navigate to the
Security
Press the Space bar to toggle between Security On and Off.
The password dialog box appears.
Type the Administrator’s password (default is “admin”).
the SmartRack 116 IP Switching System Locally
Using the OSD
User Guide
|
69
The OSD comes with an advanced password security system that contains three
access rights to the system,
F4 Scan, F5 Tune, and F6 Moving
SmartRack 116 IP system.
Each User has a Profile set by the Administrator that defines the access level to
explained in Section
OSD access is not password protected. Only the Administrator can
Security
line.
Summary of Contents for SMARTRACK 116 IP
Page 92: ...201204210 933213_EN...
