Figure
Security
is only enabled if the security status is set to On
Security Settings section on page
The
T
column in the Security Settings window displays the
In this column, there can be one
password, and six User (
U
) pa
To change a user name or password
1. In the Security Settings window, navigate to the desired
2. Type a new user name and/or password. User authentication is done solely via the
password; there is no security significance to the name.
By default, the User Profile settings are full access.
6.2.9
OSD Functions
The OSD has functions that you can activate from the main window. These functions
include:
Scan (F4)
Tune (F5)
Move Label (F6)
New Monitor - DDC2 (F10)
You can view the available functions from the OSD Help window.
To view the available OSD
1. In the General settings window
The Help window appears. It displays the functions that can be performed from
the main window (see
Operating
the SmartRack 116 IP Switching System Locally
Figure 80 – Security Settings Window
is only enabled if the security status is set to On (see the
section on page 69).
column in the Security Settings window displays the
Type
of access
In this column, there can be one Administrator (
A
) password, one Superv
) passwords.
name or password:
In the Security Settings window, navigate to the desired row and column.
Type a new user name and/or password. User authentication is done solely via the
password; there is no security significance to the name.
By default, the User Profile settings are full access.
(F1)
The OSD has functions that you can activate from the main window. These functions
DDC2 (F10)
You can view the available functions from the OSD Help window.
OSD functions:
the General settings window (see Figure 76), press
F1
.
The Help window appears. It displays the functions that can be performed from
the main window (see Figure 74).
the SmartRack 116 IP Switching System Locally
Using the OSD
User Guide
|
75
(see the Configuring
s permission.
visor (
S
)
and column.
Type a new user name and/or password. User authentication is done solely via the
The OSD has functions that you can activate from the main window. These functions
The Help window appears. It displays the functions that can be performed from
Summary of Contents for SMARTRACK 116 IP
Page 92: ...201204210 933213_EN...
