Minicom SMARTRACK 116 IP, User Manual, Page: 74 / 92

Operating the SmartRack 116 IP Switching System Locally
Using the OSD
74
| SmartRack 116 IP
Figure
Users
is only enabled i
Security Settings section
There are three different access levels:

Y
– Full access to a particular computer
functions.

V
– Viewing access only to a particular computer (
functionality).

N
– No access to a particular computer
attempted.
To give each user the desired access level:
1. In the Users Settings window, n
column.
2. Toggle between the options using the
6.2.8
Configuring the Security Settings
To configure the security settings
1. In the OSD Settings window (see
line is on it, and press
Enter
The Security Settings window
the SmartRack 116 IP Switching System Locally
Figure 79 – Users Settings Window
is only enabled if the security status is set to On (see the Configuring
section on page 69).
There are three different access levels:
Full access to a particular computer plus access to the
F4
,
F5,
and
Viewing access only to a particular computer (no keyboard/mouse
particular computer; a TIMEOUT label appears if access is
To give each user the desired access level:
In the Users Settings window, navigate to the desired computer line and
Toggle between the options using the
Space
bar.
Configuring the Security Settings
configure the security settings:
In the OSD Settings window (see Figure 75), navigate to
SECURITY
so that the red
Enter
.
ndow appears.
Configuring
and
F6
OSD
o keyboard/mouse
TIMEOUT label appears if access is
avigate to the desired computer line and
User
so that the red