Minicom SMARTRACK 116 IP, User Manual, Page: 82 / 92

Operating the SmartRack 116 IP Switching System Locally
Upgrading the SmartRack 116 IP Firmware
82
| SmartRack 116 IP
Figure
3. Click .
The hardware version of the Translator appears
Figure
RICC/ROC Version
Before you can select a RICC/ROC, you must
To verify the RICC/ROC version number:
1. Select one or more or all of the RICC/ROCs.
2. Click .
The firmware version number appears.
3. Click .
The hardware version number appears.
When “Not responding” appears,
that it is switched off.
the SmartRack 116 IP Switching System Locally
the SmartRack 116 IP Firmware
Figure 85 – Firmware Version Report
The hardware version of the Translator appears.
Figure 86 – Hardware Version Report
a RICC/ROC, you must clear the
116 IP Switch
check
To verify the RICC/ROC version number:
one or more or all of the RICC/ROCs.
The firmware version number appears.
The hardware version number appears.
When “Not responding” appears, it indicates that no computer is connected, or
checkbox.
connected, or