Minicom SMARTRACK 116 IP, User Manual, Page: 37 / 92

2. Change the
Permission
3. To change the password, c
The
Password
parameter opens. In the upper textbox, type the new password; in
the lower textbox, confirm the
You cannot change the password of an
to the system.
4. Click
OK
.
The User page opens with the user information changed accordingly
3.6 Configuring the KVM Switch
When a KVM switch is connected to the
following switch parameters

The names of the servers connected to the KVM switch
give the servers connected to
accessing the system can easily identify the servers.
To configure a KVM switch
1. From the configuration menu, select
The KVM Switch Configuration
Configuring
Configuring
Figure 41 – Edit User Page
Permission
and/or
Access
as required.
To change the password, click .
parameter opens. In the upper textbox, type the new password; in
the lower textbox, confirm the new password.
You cannot change the password of an Administrator who is currently logged on
User page opens with the user information changed accordingly
Configuring the KVM Switch
When a KVM switch is connected to the SmartRack 116 IP system, configure the
switch parameters:
The names of the servers connected to the KVM switch – It is recommended to
give the servers connected to SmartRack 116 IP unique names, so that user
accessing the system can easily identify the servers.
configure a KVM switch:
From the configuration menu, select
Switch Configuration
.
The KVM Switch Configuration page appears.
Configuring the Network
Configuring the KVM Switch
User Guide
|
37
parameter opens. In the upper textbox, type the new password; in
dministrator who is currently logged on
User page opens with the user information changed accordingly.
system, configure the
It is recommended to
unique names, so that users