6.3.3
Connecting the
To update the firmware, the
switched on.
6.3.4
Connecting the RS232 Download
To run the Update software,
5CB40419) to the computer containing the software, and to the
Switch Flash port.
6.3.5
Installing the Software
To install the Update software:
1. Download the software from the Support section of Minicom’s website.
2. Install the software on the computer’s har
Operating
the SmartRack 116 IP Switching System Locally
Upgrading the SmartRack 116 IP Firmware
Connecting the SmartRack 116 IP System
the SmartRack 116 IP system must be connected and
Connecting the RS232 Download Cable
To run the Update software, you must connect the RS232 Download cable (p/n
5CB40419) to the computer containing the software, and to the SmartRack 116 IP
Figure 82 – RS232 Cable
Installing the Software
To install the Update software:
Download the software from the Support section of Minicom’s website.
Install the software on the computer’s hard drive.
the SmartRack 116 IP Switching System Locally
the SmartRack 116 IP Firmware
User Guide
|
79
system must be connected and
connect the RS232 Download cable (p/n
SmartRack 116 IP
Download the software from the Support section of Minicom’s website.
Summary of Contents for SMARTRACK 116 IP
Page 92: ...201204210 933213_EN...
